Dr. Jubran has published more than 100 refereed journal papers and over 50 conference  proceedings papers. Here are selected papers since 2008.

          Taha Rezzag, Bassam A. Jubran, “A Numerical Study On The Effect Of Hole Inclination Angle With Imperfection On Film Cooling Effectiveness,” Proceedings of ASME Turbo Expo 2019, No. GT2019- 90490, 2019, pp. 1–11

        S. Abd Alsalam and B. Jubran, “Compound Angle Sister Holes Location Effect on Film Cooling Performance .,” in Proceedings of Canadian Aeronautics and Space Institute (AERO 2019), Montreal, Quebec, Canada., 2019, pp. 1–6

             S. Abd Alsalam and B. Jubran, “Film Cooling of Compound Angle Upstream Sister Holes,” in Proceedings of ASME Turbo Expo 2019, No. GT2019-90518, 2019, pp. 1–13

Sana Abdalsalam, Bassam Jubran, “Numerical Evaluation of Film Cooling Performance of a Cylindrical Micro Hole with the Influence of the Blowing Ratio”, Paper Proceedings of CFD 2018-26th Annual Conference of the CFD Society of Canada, Winnipeg, Manitoba,  June 2018.

Sana Abdalsalam, Bassam Jubran “Study of Film Cooling Effectiveness for a Short Cooling Hole on a Flat Plate”, Proceedings of CASI AERO 2017, May 2, 2017, Toronto, Canada.

Siavash Khajehhasani, Bassam Ali Jubran, “A numerical investigation of film cooling performance through variations in the location of discrete sister holes”, Applied Thermal Engineering, Vol. 107, 345–364, 2016.

Siavash Khajehhasani, Bassam A. Jubran,"Numerical Assessment of the Film Cooling Through Novel Sister Shaped Single-Hole Schemes", Numerical Heat Transfer J., Part A, 67: 414–435, 2015.

Silambarasan Balasubramaniyan,  Bassam Ali Jubran “Numerical Analysis of Film Cooling from Micro-Hole”. International Journal of Heat and Mass Transfer, Volume 51, issue 9, pp 1277-1285, 2015

Siavash Khajehhasani, Bassam A. Jubran, "A Numerical Study on modification of Discrete Sister Holes Location for the Film Cooling Flow" ASME Paper # GT2014-25970, Proceedings ASME Turbo Expo 2014: Gas Turbine Technical Conference and Exposition, Germany, Dusseldorf,2014-06-16.

Siavash Khajehhasani,  Bassam Jubran, "Film Cooling From Novel Sister Shaped Single-Holes" ASME Paper # GT2014-25971, Proceedings of ASME Turbo Expo 2014: Gas Turbine Technical Conference and Exposition, Germany, Dusseldorf, 2014-06-16.

Siavash Khajehhasani, Bassam A. Jubran “Film Cooling from Circular and Elliptical Exit Shaped Holes with Sister Hole  Influence”  ASME Paper # GT2013-95138, Proceedings of ASME Turbo Expo 2013: Gas Turbine Technical Conference & Exposition June 3-7, 2013, San Antonio, Texas, USA.

Siavash Khajehhasani, Bassam A. Jubran “Comparison of Various Turbulence Models to Predict Film Cooling Effectiveness from Different Exit Shaped Holes with Sister Holes Influence”  Proceedings of CFD 2013,  21st Annual Conference of the CFD Society of Canada, May 6-9, 2013 - Sherbrooke, Quebec, Canada.

Sima Baheri, B. A . Jubran, “The Effect of Turbulence Intensity on Film Cooling of Gas Turbine Blade from Trenched Shaped Holes,” J. Heat and Mass. Transfer. Volume 48, Number 5, 831-840, 2012. 

Marc Ely, B. A. Jubran, “Film Cooling from Short Holes with Sister Hole Influence” ASME Paper # GT2012-68081, Proceedings of ASME Turbo Expo 2012: Gas Turbine Technical Conference & Exposition, June 11-15, 2012, Copenhagen, Denmark.

Fadela Nemdili, Abbes Azzi, and Bassam Ali Jubran, “Numerical investigation of the influence of a hole imperfection on film cooling effectiveness”, International Journal of Numerical Methods for Heat & Fluid Flow, Volume 21, Number 1, 2011.

Karan Anand, Bassam A. Jubran, “Computational study of micro-jet impingement heat transfer in a high pressure turbine vane,” ASME Paper # GT2011-45267,Proceedings of  ASME Turbo Expos 2011 Conference, June 6-10, 2011, Vancouver, Canada.

Mustapha Benabed, Abbes  Azzi and B. A. Jubran, “Numerical investigation of the influence of incidence angle on asymmetrical turbine blade model showerhead film cooling effectiveness",J. Heat and Mass Transfer, Volume 46, Number 9 / October 2010.

Marcel Leon De Paz, B. A. Jubran, “A Numerical Study of an Impingement Array inside a Three Dimensional Turbine Vane” ASME Paper # GT2010-22270, Proceedings of  ASME Turbo Expos 2010 Conference, June 14-18, 2010, Glasgow, UK.

Marc Ely,  B. A. Jubran, “A Numerical Study on Improving Large Angle Film Cooling Performance Through the Use of Sister Holes,”  J. Numerical Heat Transfer, Part A: Applications, 55: 634–653, 2009.

Abbes Azzi, Nemdili Fadela, Bassam Ali Jubran,  “Influence of Defects of  Injection Holes on the Effectiveness of Film Cooling”, paper No. 817, CFM’09, 19^th French Congress of Mechanics, Aug. 24-28, 2009. Marseilles, France.

S. Baheri, S. P. Alavi Tabrizi, and B. A. Jubran, “Computational Investigation of Film Cooling from Trenched Holes Near the Leading Edge of a Turbine Blade,” J. Numerical Heat Transfer, Part A: Applications, 53:  issue 3, pp 208-322, 2008.

Marcel Leon De Paz, B. A. Jubran “Predictions of Thermal and Hydrodynamic Characteristics of a Single Circular Micro-Jet Impinging on a Flat Plate,”  ASME Paper # GT2008-50490, Proceedings of  ASME Turbo Expos 2008 Conference, June 9-13, 2008, Berlin, Germany.