Publications
Books/Conference Proceedings/Journal Special Issue
● Guest Editor of special Issue on the Journal
of Applied composite Materials, 2012-2013, Springer Publishing Company.
● Guest Editor of special Issue on the Journal
of Applied composite Materials, 2011-2012, Springer Publishing Company.
● Guest Editor of special Issue on the Journal
of Applied composite Materials, 2009-2010, Springer Publishing Company.
●
Proceedings of International conference on Composites: Characterization,
Fabrication and Application, Dec. 2012.
●
Proceedings of International conference on Composites: Characterization,
Fabrication and Application, Dec. 2010.
●
Proceedings of International conference on Composites: Characterization,
Fabrication and Application, Dec. 2008.
● Advances in Fatigue, Fracture and Damage
Assessment of Materials, WIT Press 2005.
● Damage
and Fracture Mechanics VIII: Computer Aided Assessment and Control , WIT Press, Published in
March
2004.
●
Fatigue Damage of Materials: WIT Press, Published
in July 2003.
Papers in Refereed Journals
- G.R. Ahmadzadeh,
and A. Varvani-Farahani, Ratcheting Assessment
of 1070 Steel Based on the O-W, J-S and A-V Kinematic Hardening Rules
under Step-Loading Conditions, Submitted to Solids and Structures (Sept.
2013).
- N.A. Kadhim,
M. Mustafa A. Varvani-Farahani, Damage
Assessment and Life Prediction of Low-Alloy Steel Samples under Random
Block Loading Histories using Energy-based Approaches, Submitted to
Fatigue Fracture of Eng Mat Structures (Sept.
2013).
- G.R. Ahmadzadeh,
and A. Varvani-Farahani, Evaluation of
Ratcheting in 1070 Steel based on Kinematic Hardening Rules of O-W,
J-S and A-V, Submitted to Fatigue & Fracture of Engineering
Materials and Structures, (July 29, 2013).
- G.R. Ahmadzadeh,
and A. Varvani-Farahani, Ratcheting Assessment
of GFRP Composites in Low-Cycle Fatigue Domain, Applied Composite
Materials, 2013 (in-press).
- G.R. Ahmadzadeh,
and A. Varvani-Farahani, Ratcheting Assessment
of Materials Based on the Modified A-F Hardening Rule at various uniaxial
stress levels, Fatigue & Fracture of Engineering Materials and
Structures, in-press (2013).
- G.R. Ahmadzadeh,
and A. Varvani-Farahani, Ratcheting Assessment
of Steel Alloys under Step-Loading Conditions, Materials & Design,
Vol. 51, pp. 231–241, 2013.
- G.R. Ahmadzadeh,
and A. Varvani-Farahani, Ratcheting assessment
of steel alloys under uniaxial loading: A parametric model versus
hardening rule of Bower, Fatigue & Fracture of Engineering Materials
and Structures, Vol. 36, Issue 4, pages 281–292, 2013.
- G.R. Ahmadzadeh,
and A. Varvani-Farahani, Concurrent
ratcheting-fatigue damage analysis of uniaxially
loaded A-516 Gr.70, SS304 and 42CrMo Steels, Fatigue & Fracture of
Engineering Materials and Structures, Vol.35, issue 10,pp. 962-970, 2012.
- M. Noban,
H. Jahed, , A. Varvani-Farahani,
The choice of cyclic plasticity models in fatigue life assessment of 304
and 1045 steel alloys based on the critical plane-energy fatigue damage
approach, International Journal of Fatigue, Vol. 43, pp.217–225, 2012.
- G.R. Ahmadzadeh,
and A. Varvani-Farahani, Tri-Phasic Ratcheting
Strain Prediction of Materials over Stress Cycles, Fatigue & Fracture
of Engineering Materials and Structures, Vol. 35, Issue 10, pp.929-935,
2012.
- G.R. Ahmadzadeh,
A. Shirazi, and A. Varvani-Farahani,
Damage Assessment of CFRP [90/±45/0] Composite Laminates over Fatigue
Cycles, the Journal of Applied Composite Materials, Volume 18, Issue 6,
pp.559-569, 2011.
- H. Mivehchi
and A. Varvani-Farahani, The Effect of
Temperature on Fatigue Strength of FRP Composites", Journal of
Mechanics of Composite Materials, Vol.47, Number 2, pp.185-192, 2011.
- T. H. Topper, J.J.F. Bonnen, M. Khalili , and A. Varvani-Farahani, The influence of biaxial strain
ratio and strain range on crack growth mode and crack shape, the Journal
of Materials Science, Vol.46, pp. 215-227, 2011.
- F. Pakandam,
A. Varvani-Farahani, Fatigue damage assessment
of various welded joints under uniaxial loading based on energy methods,
International Journal of Fatigue, Vol. 33, pp. 519-528, 2011.
- H. Mivehchi
and A. Varvani-Farahani, The effect of
temperature on fatigue strength and cumulative fatigue damage of FRP
composites, Procedia Engineering, Vol. 2, pp.
2011-2020., 2010.
- F. Pakandam,
and A. Varvani-Farahani, A comparative study on fatigue
damage assessment of welded joints under uniaxial loading based on energy
methods, Procedia Engineering, Vol. 2 ,pp.
2027-2035, 2010
- K. Salmalian,
N. Nariman-zadeh, H. Gharababei,H.
Haftchenari, A. Varvani-Farahani,
Multi-objective Evolutionary Optimization of Polynomial Neural Networks
for Fatigue Life Modeling and Prediction of Unidirectional CFRP
Composites, Proceedings of the Institution of Mechanical Engineers, Part
L, Journal of Materials: Design and Applications, Vol.224, Number 2, pp.
79-91, 2010.
- A. Shirazi,
A. Varvani-Farahani, and H. Lu, An inverse
analysis of warpage for trilayer
thin-plate under thermal cycle, the Journal of Materials and Design, Vol.
31, pp. 4219–4228, 2010.
- H. Mivehchi
and A. Varvani-Farahani, The Effect of
Temperature on Fatigue Damage of FRP Composites" Journal of Materials
Science, Vol. 45 , pp. 3757–3767, 2010.
- A. Varvani-Farahani,
Composite Materials: Characterization, Fabrication and
Application-Research Challenges and Directions (Editorial), Applied
Composite Materials, Vol. 17, Issue 2, pp. 63-67, 2010.
- A. Shirazi,
H. Lu, and A. Varvani-Farahani, A Hybrid Inverse
Method for Evaluation of FC-PBGA Material Response under Thermomechanical Cycles, the Journal of Materials
Science: Materials in Electronics, Vol. 21 (7), pp. 737-749, 2010.
- A. Varvani-Farahani,
H. Najmi, A Damage Assessment Model for
Cadaveric Cortical Bone Subjected to Fatigue Cycles, International Journal
of Fatigue, Vol.32, pp.420-427, 2010.
- A. Shirazi,
A. Varvani-Farahani, A stiffness degradation based
fatigue damage model for FRP composite of (0/q) laminate systems, Applied
Composite Materials, Vol. 17, Issue 2, pp
137-150, 2010.
- A. Varvani-Farahani,
H. Najmi, A Fatigue Damage Model for the
Fiber-reinforced Composite of Haversian
Cadaveric Cortical Bone, Journal of Composite Materials, Vol. 42, No. 25,
pp. 2747-2760, 2008.
- A. Shirazi,
A.Varvani-Farahani, and H. Lu, Comparative study
on Stress-strain hysteresis response of SAC solder joints under thermal
cycles, International Journal of Fracture, Volume 151, pp,
135-150, 2008.
- H. Jahed,
A. Varvani-Farahani, M. Noban,
I. Khalaji, An Energy-Based Fatigue Life
Assessment Model for Various Metallic Materials under Proportional and
Non-Proportional Loading Conditions, International Journal of Fatigue,
Volume 29, pp. 647-655, 2007.
- A. Varvani-Farahani,
M.R. Kianoush M. Sharma, Fatigue failure
assessment of engineering components under service loading conditions,
Journal of Materials & Design, Volume 28, Issue 2, pp. 575-580, 2007.
- A. Varvani-Farahani,
A. Shirazi, A fatigue damage model for (0/90)
FRP composites based on Stiffness degradation of 0° and 90° composite
plies, Journal of Reinforced Plastic Composite, Vol. 26, No.13, pp. 1319 -
1336, 2007.
- A. Varvani-Farahani,
A. Shirazi, Prediction of Stiffness degradation
and damage assessment of unidirectional GRP composites under fatigue
loading, the Journal of Science and Engineering of Composite Materials,
Vol. 14 (3), pp. 197-204, 2007.
- A. Varvani-Farahani,
H. Haftchenari, M. Panbechi,
An energy-based fatigue damage parameter for off-axis unidirectional
fiber-reinforced composites, Composite Structures, Vol. 79 (3), pp.
381-389, 2007.
- A. Varvani-Farahani,
H. Haftchenari, M. Panbechi,
A Fatigue Damage Parameter for Life Assessment of Off-Axis Unidirectional
Glass Fiber-Reinforced Composites, Journal of Composite Materials, Vol. 40, No. 18, pp. 1659-1670, 2006.
- H. Jahed,
A.Varvani-Farahani, Upper and Lower Fatigue Life
Model using Energy-Based Fatigue Properties, International Journal of
Fatigue, Vol. 28, pp. 467-473, 2006.
- A. Varvani-Farahani,
M. Sharma, M.R. Kianoush, Fatigue Damage
Analysis and Life Assessment under Variable Amplitude Loading Conditions,
Journal of Materials Science and Engineering: A, Vol. 403, pp. 42-47,
2005.
- A. Varvani-Farahani,
A. Ghahramani, A. and T. Kodric,
A method of fatigue life prediction in notched components, the Journal of
Materials Processing Technology, Vol. 169 (1), pp. 94-102, 2005.
- A. Varvani-Farahani,
Silicon MEMS Components: A Fatigue Life Assessment Approach, Journal of Microsystem
Technologies, Vol. 11, Numbers 2-3, pp. 129 – 134, 2005.
- A. Varvani-Farahani,
H. Alighanbari,
Materials Cyclic Behavior at Supersonic Speeds, Journal of Materials
Processing Technology, Vol 152/1 pp 84-90, 2004.
- A. Varvani-Farahani,
A.S. Mirani, Derivation of Closure-Free Crack
Growth Rate under Biaxial Fatigue Loading Conditions, Scripta
Materialia Vol. 48 (3), pp. 241-247, 2003.
- A. Varvani-Farahani,
Critical Plane-Energy Based Approach on Assessment of Biaxial Fatigue
Damage where the Stresses are at different Frequencies, (Invited Paper)
Published in Elsevier Science Ltd and European EISI STP, pp. 203-221,
2003.
- A. Varvani-Farahani,
T.H.Topper, A New Multiaxial
Fatigue Life and Crack Growth Rate Model for various In-phase and
Out-of-phase Strain Paths, published in the American Society for Testing
of Materials, ASTM STP 1387, 305-322, 2000.
- A. Varvani-Farahani,
T.H. Topper, The Effect of Biaxial Strain Ratio and Periodic Compressive
Overstrains on Fatigue Crack Growth Mode and Crack Growth Rate, American
Society for Testing and Materials, ASTM STP 1360, 299-312, 1999.
- A. Varvani-Farahani,
A New Energy-critical Plane Parameter for Fatigue Life Assessment of
various Metallic Materials Subjected to In-phase and Out-of-phase Multiaxial Fatigue Loading Conditions, International
Journal of Fatigue, Vol. 22, 295-305, 2000.
- A. Varvani-Farahani,
T.H. Topper, Increases in Fatigue Crack Growth Rate and Reductions in
Fatigue Strength due to Periodic Overstrains in Biaxial Fatigue Loading,
American Society for Testing and Materials, ASTM STP 1372, Fatigue Crack
Growth Thresholds, Endurance Limits and Design, 192-206, 2000.
- A. Varvani-Farahani,
T.H. Topper, Closure-free Biaxial Fatigue Crack Growth Rate and Life
Prediction under various Biaxiality Ratios in
1045 Steel, Fatigue and Fracture of Engineering Materials and Structures,
22: No.8, 697-710, 1999
- A. Varvani-Farahani,
T.H. Topper, The Effect of Periodic Compressive Overstrain Excursions on
Crack Closure and Crack Growth Rates of Short Fatigue Cracks-Measurements
and Modeling, American Society for Testing and Materials, ASTM STP 1343,
Advances in Fatigue Crack Closure and Analysis, 2:304-320, 1999
- A. Varvani-Farahani,
T.H. Topper, Crack Growth and Closure Mechanisms of Shear Cracks under
Constant Amplitude Biaxial Straining and Periodic Compressive
Overstraining in 1045 Steel, International Journal of Fatigue, 19:
589-596, 1997
- A. Varvani-Farahani,
T.H. Topper, Short Fatigue Crack Characterization and Detection Using
Confocal Scanning Laser Microscopy (CSLM),American Society for Testing and
Materials ASTM STP 1318, 43-55,
1997
- A. Plumtree,
A. Varvani-Farahani, Non-propagating fatigue
crack behavior in Al 2024-T351, International Journal of Fatigue
19(10):730, 1997
- A. Plumtree,
A. Varvani-Farahani, Non-propagating fatigue
crack behavior in Al 2024-T351 Materials Science Forum, 217-222:
1377-1382, 1996
- A. Varvani-Farahani,
A. Plumtree, and T.H. Topper, Confocal Scanning
Laser Microscopy Measurements of the Growth and Morphology of Microstructurally Short Fatigue Cracks in Al 2024-T351
Alloy, Fatigue and Fracture of Engineering Materials and Structures.
19:1153-1159, 1996
Papers in Refereed Conference Proceedings
- G.R. Ahmadzadeh,
A. Varvani-Farahani, Ratcheting prediction of
1070 steel samples under asymmetric single- and multi-step stress cycles
by means of kinematic hardening rules, X-Mech
2014, Feb. 18-20, 2014 (Article code: A-10-354-1).
- G.R. Ahmadzadeh,
A. Varvani-Farahani, “Prediction of Ratcheting
Strain Values over Asymmetric Stress Cycles in Steel Samples” Accepted to
the 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM2013),
page 142 -Montreal July 23-26, 2013.
- G.R. Ahmadzadeh, A. Varvani-Farahani,
Prediction of Ratcheting Strain generated over Uniaxial Stress Cycles in
FRP Composites CCFA-3, Dec. 18-19, 2012, pp.115-116, Tehran, Iran.
- A. Varvani-Farahani,
A. Sadeghi-Naini, The influence of Strain rate
and donor age in damage response of cortical bone composite, CCFA-3, Dec.
18-19, 2012, pp.19-20, Tehran, Iran.
- G.R. Ahmazadeh,
A. Varvani-Farahani, Prediction of ratcheting
strain generated over uniaxial stress cycles in FRP composites, CCFA-3,
Dec. 18-19, 2012, pp.115-116, Tehran, Iran.
- H. Mivehchi
and A. Varvani-Farahani, Temperature Effect on
Monotonic Strength of FRP Composite Laminates with Various Lay-ups,
CCFA-2, Kish Island, Dec. 27-30, 2010.
- G.R.Ahmadzadeh, A. Shirazi,
and A. Varvani-Farahani, Damage Assessment of
CFRP Composites of [90/±45/0]s Layup based on Stiffness Degradation over
Fatigue Stress Cycles, CCFA-2, Kish Island, Dec. 27-30, 2010.
- F. Pakandam,
and A. Varvani-Farahani, fatigue damage
assessment of welded joints under uniaxial loading based on energy
methods, CSME Forum 2010 (June 7 - 9, 2010.
- F. Pakandam,
and A. Varvani-Farahani, fatigue damage and life
assessment of welded joints using energy methods, the 10th International
Fatigue Congress, Prague, Czech Republic,
June 6 - 11, 2010.
- C. Sutton, A. Varvani-Farahani, Fatigue Damage Assessment of
Particle-Reinforced Metal Matrix Composites under Uniaxial and Multiaxial Loading Conditions, the 8th joint
Canada-Japan workshop on Composites, Montreal, Quebec, Canada (July
26-29, 2010).
- H. Mivehchi, A. Varvani-Farahani,
The Effect of Temperature on Fatigue Strength of FRP Composites, the 10th
International Fatigue Congress, Prague, Czech
Republic-June 6 - 11, 2010.
- G.R. Ahmadzadeh,
A. Varvani-Farahani, Fatigue Damage Assessment
of FRP (90/45/0) composite Laminates, the 10th International Fatigue
Congress, Prague, Czech Republic- June 6 - 11, 2010.
- A. Varvani-Farahani,
Damage progress and cracking in human cadaveric cortical bone of various
age, the 3rd International
Conference on Mechanics of Biomaterials and Tissues, Clearwater Beach,
Florida, Dec.13-17, 2009.
- A. Shirazi,
H. Lu and A. Varvani-Farahani, Evaluation of
Thermal Stress in a Flip Chip Package by Hybrid Experimental-Analytical
Method, International Conference on Soldering & Reliability,
Toronto, May 20-21, 2009.
- A. Shirazi,
and A. Varvani-Farahani, Macro-micro Modeling of
Fatigue Damage of Unidirectional FRP Composites, CCFA-1, December 15-18,
2008, Kish-Iran.
- A. Shirazi,
H. Lu, and A. Varvani-Farahani, Stress Dependent
Behavior of Adhesively Bonded Multilayer Flip Chip Package During Reflow
Thermal Profile, CCFA-1, December 15-18, 2008, Kish-Iran.
- H. Mivehchi,
A. Shirazi and A. Varvani-Farahani,
Application of an Optical In-plane Strain Measurement Technique in Fatigue
Damage Assessment of Unidirectional FRP Composites, CCFA-1, December
15-18, 2008, Kish-Iran.
- A. Farjad
Bastani, H. Haftchenari,
A. Varvani-Farahani, Monotonic Properties of
Unidirectional GRP Composites with Various Off-Axis Angles, the 1st
International Conference on Composites: Characterization, Fabrication, and
Application(CCFA-1), December 15-18, 2008, Kish-Iran.
- A. Varvani-Farahani,
H. Najmi, Natural Composite of Cortical Bone: A
Fatigue Damage Evolution Model, the Seventh Joint Canada-Japan Workshop on
Composites, July 28 -31, 2008 Kanagawa, Japan
- A. Varvani-Farahani,
A. Shirazi, H. Lu, Stress-strain hysteresis
response of SnAgCu (SAC) solder joints under
thermal cycles, the 8th
International Conference on Fundamentals of Fracture (ICFF VIII), Hong
Kong-Guangzhu, Jan. 3-7, 2008, pp. 164.
- H. Haftchenari,
A. Farjad Bastani, K. Mohammadi, A. Varvani-Farahani,
Microscopic Examination and Statistical Analysis of Damage Progress in
Unidirectional Glass/Epoxy Composites with various Off-axis Angles, the
Canadian-International Composite Conference (CanCom)
2007, Winnipeg, Manitoba, Canada, August 2007.
- A. Varvani-Farahani,
H. Najmi, Stiffness Degradation in Human
Cortical Bone under Tensile Fatigue Loads, 2nd International Conference on
Mechanics of Biomaterials and Tissues, Kauai, Hawaii, USA (Dec. 9-13),
2007.
- A. Shirazi,
H. Lu, H. and A. Varvani-Farahani, Thermal
fatigue life estimation of lead-free solder joint in a real package, to
the 21th Canadian Congress of
Applied Mechanics (CANCAM 2007), Ryerson University, Toronto, Canada (June
3-7), 2007.
- H. Najmi,
A. Varvani-Farahani, A model to assess fatigue
damage of cortical bone, the 30th Canadian Medical and Biological
Engineering Conference: Improving Medical Device Usability, Toronto,
Canada (June 16-19), 2007.
- H. Najmi,
A. Varvani-Farahani, Fatigue damage assessment
of human cortical bone, the
21th Canadian Congress of Applied
Mechanics (CANCAM 2007), Ryerson University, Toronto, Canada (June 3-7),
2007.
- M. Jahandardost,
H. Haftchenari, A. Varvani-Farahani,
FE Analysis of a Cracked Aluminum Panel Reinforced by CFRP Composite
Patch, 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials
Conference, Honolulu, Hawaii, 23 - 26 Apr 2007.
- A. Varvani-Farahani,
A. Shirazi, A fatigue damage model based on
stiffness degradation in unidirectional and cross-ply FRP composites, the 8th International Conference on Multiaxial Fatigue and Fracture, Sheffield-UK, June
2007.
- A. Shirazi,
A. Varvani-Farahani, Fatigue damage analysis
based on stiffness drop in unidirectional GRP composites, Proceedings of
the 6th Canada-Japan Workshops on Composites, August 2006, Ryerson
University, Canada, pages 171-178.
- A. Varvani-Farahani,
H. Haftchenari,
A phenomenological fatigue model for unidirectional FRP composites,
Fatigue Congress 2006, Atlanta, USA, May 14-19, 2006.
- I. Khalaji,
H. Jahed, A. Varvani-Farahani,
M. Noban, Out-of-phase loading life prediction
using energy-fatigue life relation, 4th International conference of
Mechanical Engineering, Isfahan-Iran, May 2006.
- H. Jahed,
A. Varvani-Farahani, M. Noban,
I. Khalaji, An energy-based fatigue life model
for proportional and non-proportional loading conditions, Fatigue Congress
2006, Atlanta, USA, May 14-19, 2006.
- A. Varvani-Farahani,
H. Haftchenari, M. Panbechi,
A Fatigue Damage Parameter to Assess Life of Unidirectional Glass-Fiber
Reinforced Plastic Composites , CANCOM 2005, Vancouver, Canada, August
2005.
- H. Jahed,
A. Varvani-Farahani, Low cycle fatigue life
prediction using energy life curves, 7th International Conference on
Biaxial / Multiaxial Fatigue and Fracture, Berlin-Germany ,
June 2004, pp.141-146.
- A. Ghasempoor,
A.Varvani-Farahani, International conference in
manufacturing Engineering, Iran, Tehran 2004.
- A. Varvani-Farahani,
A. Ghasempoor, An Energy-Based Criterion on
Fatigue Damage Assessment of Silicon Microcomponents,
(Invited Paper) the 8th
International Conference on Damage and Fracture Mechanics 2004,
Crete-Greece, 2004, pp.43-50.
- A. Varvani-Farahani,
Fatigue Damage and Durability Assessment of MEMS Silicon-based Components,
the International Conference on Electroceramics,
Massachusetts Institute of Technology, Cambridge, MA USA, 3-7 August 2003.
- H. Haftchenari,
A. Varvani-Farahani, The influence of
temperature on tensile properties of carbon/epoxy composites in the
transverse direction, the 4th Canadian-International Composite Conference
(CanCom), Published, August 2003, Ottawa,
Canada.
- C.R. Cvetnic,
A. Varvani-Farahani, C. Ravindran,
Fracture surface study of spur gears subjected to service loading history,
Int. Conf. on Fatigue Damage of Materials-Experiment & Analysis, 2003,
pp. 45-54.
- H. Haftchenari,
A. Varvani-Farahani, Microcracking
response of CFRP composites at different temperatures, Int. Conf. on
Fatigue Damage of Materials-Experiment & Analysis, 2003, pp. 389-398.
- T.H. Topper, A. Varvani-Farahani, Crack closure, crack growth rate and
fatigue life changes due to compressive overloads in biaxial fatigue, Int.
Conf. on Fatigue Damage of Materials-Experiment & Analysis (invited
paper), 2003, pp. 335-344.
- A. Varvani-Farahani,
D.L. Chen, Modified Fatigue Crack
Closure Concept: Further Modeling and Verification, the 7th International
Conference on Assessment and Control of Damage & Fracture Mechanics
2002, (Invited Paper, Maui, Hawaii, Oct. 2002), pp. 205-214.
- A. Varvani-Farahani,
H. Alighanbari, Fatigue Response of Panels at
Supersonic Flight Speeds, the 8th International Fatigue Congress (Fatigue
2002), June 2002, Stockholm, Sweden, Vol. 1, pp. 149-157.
- A. Varvani-Farahani,
Fatigue Damage Progress in the Crack-Plane, proceedings of the 2nd International
Conference on Fracture and Damage Mechanics, FDM 2001, Milan-Italy, 107-112.
- A. Varvani-Farahani,
Biaxial Fatigue Life Assessment where Stresses are at different
Frequencies, Proceedings of the 6th International Conference on Biaxial/ Multiaxial Fatigue and Fracture, Lisboa,
Portugal, 2001, Vol. 1, pp.249-258.
- A. Varvani-Farahani,
T.H. Topper, A New Energy-based Multiaxial
Fatigue Parameter, Part 2: Biaxial Fatigue Crack Growth Rate and Life
Prediction of SAE 1045 Steel Specimens Subjected to various Biaxial Strain
Ratios” International Conference on “Fatigue and Durability Assessment of
Materials, Components and Structures”- Fatigue 2000, pp. 323-332.
- A. Varvani-Farahani,
A., and Topper, T. H., A New Energy-based Multiaxial
Fatigue Parameter, Part 1: Multiaxial fatigue
Life Assessment for various In-phase and Out-of-phase strain Paths”
International Conference on “Fatigue and Durability Assessment of
Materials, Components and Structures”- Fatigue 2000, pp. 313-321.
- T.H. Topper, A. Varvani-Farahani, A. Dabayeh, and T. Lam, Variable Amplitude Fatigue Life
Predictions incorporating the effect of Overload Induced changes in Crack
Closure” the Eighth International Conference on Mechanical Behavior of
Materials (ICM8), 1: 116-121, 1999.
- A. Varvani-Farahani,
T.H. Topper, Biaxial Fatigue Crack Growth and Closure in SAE 1045 Steel, the 5th
International Conference on Biaxial/Multiaxial
Fatigue and Fracture (5ICBMFF)-Cracow-Poland, 2: 149-165, 1997
- A. Plumtree,
A. Varvani-Farahani, Prediction of non-propagating
fatigue crack behavior in Aluminum alloys, Proceedings of the sixth
international fatigue congress (Fatigue 96), Berlin-Germany, 1: 271-275,
1996.
- A. Varvani-Farahani,
T.H.Topper, The effect of periodic compressive
overloads on the crack surface roughness and crack growth rate of short
fatigue cracks in 1045 Steel, Proceedings of the sixth international
fatigue congress (Fatigue 96), Berlin-Germany, 1: 295-300, 1996.